> > HIGH DENSITY VIDEO DISTRIBUTION AMPLIFIER (2 Channel, 1 in 4 out per Channel) (BH231/3125)

HIGH DENSITY VIDEO DISTRIBUTION AMPLIFIER (2 Channel, 1 in 4 out per Channel) (BH231/3125)

High density Video Distribution Amplifier module comes already installed when ordered with a BH220 universal rack or available to buy separately when making additions to an existing rack. Each unit accommodates 2 independent channels in and gives 4 outputs per channel and takes up one slot on a BH220 rack. Its installer friendly design has adjustable gain and high frequency lift controls and is fully RoHS compliant.

TECHNICAL	DESCRIPTION
INPUT SIGNAL	Nominal 1.0V Pk-Pk @ 75 ohms composite video signal. Suitable for either colour or monochrome video
OUTPUT SIGNAL	Nominal 1.0V Pk-Pk @ 75 ohms(unit set for Unity Gain)
AT UNITY GAIN	Differential Phase <3º. Differential Gain <3%
GAIN CONTROL	Variable from -2.0dB to +6.0dB
HF LIFT CONTROL	Variable from 0dB to +6.0dB @ 4.4MHz
INPUT CONNECTORS	Two BNC type coax connectors
OUTPUT CONNECTORS	Eight BNC type coax connectors
SURGE PROTECTION	Transorbs fitted as standard (gas tubes optional for additional protection in harsh environments) protection)
POWER	12V DC, 200 mW per channel supplied by the BH220 rack
OPERATING TEMP	-30ºC to +45ºC

Ordering Information:
For a quotation, further details or technical support and advice, contact us by phone on +44 (0)1483 480969, fax +44 (0)1483 797268 or , quoting part number BH231/3125 (max 16 per rack giving 32 channels).

Product to be used in conjunction with BH231/3125:
BH220         19” Modular Rack (unpopulated), with in line power supply and extender card
BH192/3125   2 Channel, 1 in 2 out module with Video Distribution Amplifier (max 16 per rack)
BH193/3125   2 Channel, 1 in 5 out module with Video Distribution Amplifier (max 8 per rack)