|
|
Home > Video Distribution Amplifiers >
VIDEO DISTRIBUTION AMPLIFIER (2 Channel, 1 in 5 out per Channel) (BH193/3125)
VIDEO DISTRIBUTION AMPLIFIER (2 Channel, 1 in 5 out per Channel) (BH193/3125)
Video Distribution Amplifier module comes already installed when ordered with a BH220
universal rack or available to buy separately when making additions to an existing rack.
Each unit accommodates 2 independent channels in and gives 5 outputs per channel and
takes up two slots on a BH220 rack. Its installer friendly design has adjustable gain and
high frequency lift controls and is fully RoHS compliant
|
TECHNICAL |
DESCRIPTION |
INPUT SIGNAL |
Nominal 1.0V Pk-Pk @ 75 ohms composite video signal.
Suitable for either colour or monochrome video |
|
OUTPUT SIGNAL |
Nominal 1.0V Pk-Pk @ 75 ohms (unit set to Unity Gain) |
|
AT UNITY GAIN |
Differential Phase <3º. Differential Gain <3% |
|
GAIN CONTROL |
Variable from -2.0dB to +6.0dB |
|
HF LIFT CONTROL |
Variable from 0dB to +6.0dB @ 4.4MHz |
|
INPUT CONNECTORS |
Two BNC type coax connectors |
|
OUTPUT CONNECTORS |
Ten BNC type coax connectors |
|
SURGE PROTECTION |
Transorbs fitted as standard (gas tubes optional for extra
protection) |
|
POWER |
12V DC, 200 mW per channel supplied by the BH220 rack |
OPERATING TEMP |
-30ºC to +45ºC |
Ordering Information:
For a quotation, further details or technical support and
advice, contact us by phone on +44 (0)1483 480969, fax +44
(0)1483 797268 or email us, quoting
part number BH 193/3125 (max 8 per rack).
Products available for use with BH193/3125:
BH220
19” Modular Rack (unpopulated), with in line power supply and
extender card
BH192/3125
2 Channel, 1 in 2 out module with Video Distribution Amplifier (max 8 per rack)
BH231/3125
2 Channel, 1 in 4 out module with Video Distribution Amplifier (max 16 per rack)
|
