Home | About Us | Contact Us    
Addlestone Electronics
Home > Video Distribution Amplifiers > VIDEO DISTRIBUTION AMPLIFIER (2 Channel 1 in 5 out per Channel) (BH66-2)

VIDEO DISTRIBUTION AMPLIFIER (2 Channel - 1in 5out) (BH66-2)

bh66_2When installing CCTV equipment it is sometimes required to send the video signal from a camera to more than one monitor or other items of receiving equipment at the same time. This can be achieved using a Distribution Amplifier.

The BH66/2 is a free standing Distribution Amplifier with two channels, each channel having five outputs.

Tool-less controls for overall Gain and High Frequency Lift enable the installer to obtain the correct signal levels.

Contact us about this product

TECHNICAL
DESCRIPTION
INPUT SIGNAL
Nominal 1.0V Pk-Pk @ 75 ohms composite video signal. Suitable for either colour or monochrome video
OUTPUT SIGNAL
Nominal 1.0V Pk-Pk @ 75 ohms (unit set to Unity Gain)
AT UNITY GAIN
Differential Phase <3º. Differential Gain <3%
GAIN CONTROL
Variable from -2.0dB to +6.0dB
HF LIFT CONTROL
Variable from 0dB to +6.0dB @ 4.4MHz
INPUT CONNECTOR
TWO BNC type coax connector
OUTPUT CONNECTORS
TEN BNC type coax connectors
SURGE PROTECTION
Transorbs fitted as standard
POWER
12V DC 300 mW power consumption connected via 2.1 mm miniature socket
OPERATING TEMP
-30ºC to +45ºC
DISTANCE
250 metres when used with good quality RG59
DIMENSIONS
120mm Depth x 180mm Width x 70mm Height (excluding BNC connectors)
MOUNTING
Desktop Unit

Ordering Information:
For a quotation, further details or technical support and advice, contact us by phone on +44 (0)1483 480969, fax +44 (0)1483 797268 or email us, quoting part number BH66-2.