|
Home > Video Distribution Amplifiers > VIDEO DISTRIBUTION AMPLIFIER (1 in 10 out) (BH66-1)
VIDEO DISTRIBUTION AMPLIFIER
(1 in 10 out) (BH66-1)
When installing
CCTV equipment it is sometimes required to send the video signal from a
camera to more than one monitor or other items of receiving equipment
at the same time. This can be achieved using a Distribution Amplifier.
The BH66-1 is a free standing Distribution Amplifier
with one signal input and ten signal outputs. All the connectors are
75 ohm BNC type for coax cable.
Tool-less controls for overall Gain and High Frequency
Lift enable the installer to obtain the correct signal levels.
TECHNICAL
|
DESCRIPTION
|
INPUT SIGNAL |
Nominal 1.0V Pk-Pk @ 75 ohms composite video signal. Suitable
for either colour or monochrome video |
OUTPUT SIGNAL |
Nominal 1.0V Pk-Pk @ 75 ohms (unit set to Unity Gain) |
AT UNITY GAIN |
Differential Phase <3º. Differential Gain <3% |
GAIN CONTROL |
Variable from -2.0dB to +6.0dB |
HF LIFT CONTROL |
Variable from 0dB to +6.0dB @ 4.4MHz |
INPUT CONNECTOR |
BNC type coax connector |
OUTPUT CONNECTORS |
TEN BNC type coax connectors |
SURGE PROTECTION |
Transorbs fitted as standard |
POWER |
12V DC 300 mW power consumption connected via 2.1 mm miniature socket |
OPERATING TEMP |
-30ºC to +45ºC |
DISTANCE |
250 metres when used with good quality RG59 |
DIMENSIONS |
120mm Depth x 180mm Width x 70mm Height (excluding BNC connectors) |
MOUNTING |
Desktop Unit |
Ordering Information:
For a quotation, further details or technical support and advice,
contact us by phone on +44 (0)1483 480969, fax +44 (0)1483 797268 or email
us, quoting part number BH66-1.
|