Home | About Us | Contact Us    
Addlestone Electronics
Home > Video Distribution Amplifiers >Video Distribution Amplifier, 4 Channel, 1 in 4 out per Channel (BH252)

Video Distribution Amplifier, 4 Channel, 1 in 4 out per Channel (BH252)

BH252The BH252 unit is a four channel Video Distribution Amplifier that will split each video signal into four identical outputs with no loss of signal strength or signal quality.

The unit can be cabinet or wall mounted.

Its installer-friendly design has tool-less adjustable gain and high frequency lift controls. It is fully RoHS compliant and also comes complete with 12V DC power supply and mains lead.

Contact us about this product

TECHNICAL
DESCRIPTION
INPUT SIGNAL
Nominal 1.0V Pk-Pk @ 75 ohms composite video signal. Suitable for either colour or monochrome video
OUTPUT SIGNAL
Nominal 1.0V Pk-Pk @ 75 ohms (unit set to Unity Gain)
AT UNITY GAIN
Differential Phase <3º. Differential Gain <3%
GAIN CONTROL
Variable from -2.0dB to +6.0dB
HF LIFT CONTROL
Variable from 0dB to +6.0dB @ 4.4MHz
INPUT CONNECTORS
Four x BNC type coax connector
OUTPUT CONNECTORS
Four x Four BNC type coax connectors
SURGE PROTECTION
Transorbs fitted as standard
POWER
PSU input 100 to 240V AC / output 12V DC connected via 2.1 mm miniature socket
OPERATING TEMP
-30ºC to +45ºC
DISTANCE
250 metres when used with good quality RG59
DIMENSIONS
19 x 2.5U x 25mm (excluding BNC connectors)
MOUNTING
Suitable for any standard 19 cabinet or wall mounting

Ordering Information:
For a quotation, further details or technical support and advice, contact us by phone on
+44 (0)1483 480969, fax +44 (0)1483 797268 or email us, quoting part number BH252.

Products available for use with BH252:
BH184          Video Distribution Amplifier and Video Launch Amplifier, 1in 2out
BH186          Hum Canceller and Line Corrector
BH187          Line Corrector for unbalanced video signal, coax in/out