Home | About Us | Contact Us    
Addlestone Electronics
Home > Video Distribution Amplifiers > VIDEO DISTRIBUTION AMPLIFER 1 IN 4 OUT (BH207)

VIDEO DISTRIBUTION AMPLIFER 1 IN 4 OUT (BH207)

bh207The BH207 is a single channel Video Distribution Amplifier that will split a video signal into four identical outputs with no loss of signal strength or signal quality.

Its installer-friendly design has toolless adjustable gain and high frequency lift controls. This standalone unit is fully RoHS compliant and also comes complete with 230V plugtop 12V DC power supply (110V available on request).

Contact us about this product

TECHNICAL
DESCRIPTION
INPUT SIGNAL
Nominal 1.0V Pk-Pk @ 75 ohms composite video signal. Suitable for either colour or monochrome video
OUTPUT SIGNAL
Nominal 1.0V Pk-Pk @ 75 ohms (unit set to Unity Gain)
AT UNITY GAIN
Differential Phase <3º. Differential Gain <3%
GAIN CONTROL
Variable from -2.0dB to +6.0dB
HF LIFT CONTROL
Variable from 0dB to +6.0dB @ 4.4MHz
INPUT CONNECTOR
BNC type coax connector
OUTPUT CONNECTORS
Four BNC type coax connectors
SURGE PROTECTION
Transorbs fitted as standard
POWER
12V DC 200 mW power consumption connected via spring
loaded screw less terminal block
OPERATING TEMP
-30ºC to +45ºC
DISTANCE
250 metres when used with good quality RG59
DIMENSIONS
132mm L x 45mm W x 23mm H (excluding BNC connectors)
MOUNTING
Via 2 x 3.5mm holes for convenient screw fixing

Ordering Information:
For a quotation, further details or technical support and advice, contact us by phone on
+44 (0)1483 480969, fax +44 (0)1483 797268 or email us, quoting part number BH207.

Products available for use with BH207:
BH184 Video Distribution Amplifier and Video Launch Amplifier, 1in 2out
BH187 Line Corrector for unbalanced video signal, coax in/out