Addlestone Electronics - Distributors & Installers - Video Distribution Amplifier 2 Channel, 1 in 2 out per Channel (BH192/3125)
Home | About Us | Contact Us    
Addlestone Electronics
Home > Video Distribution Amplifiers > Video Distribution Amplifier, 2 Channel, 1 in 2 out per Channel (BH192/3125)

Video Distribution Amplifier, 2 Channel, 1 in 2 out per Channel (BH192/3125)

bh192/3125Video Distribution Amplifier module comes already installed when ordered with a BH220 universal rack or available to buy separately when making additions to an existing rack.

Each unit accommodates 2 independent channels in and gives 2 outputs per channel and takes up one slot on a BH220 rack. Its installer friendly design has adjustable gain and high frequency lift controls and is fully RoHS compliant.


Contact us about this product

TECHNICAL
DESCRIPTION
INPUT SIGNAL
Nominal 1.0V Pk-Pk @ 75 composite video signal.
 Suitable for either colour or monochrome video
OUTPUT SIGNAL
Nominal 1.0V Pk-Pk @ 75Ω (unit set to Unity Gain)
AT UNITY GAIN
Differential Phase <3º. Differential Gain <3%
GAIN CONTROL
Adjustable between -2dB and +6dB
HF LIFT CONTROL
Adjustable between -2dB and +6dB @ 4.4MHz
INPUT CONNECTOR
Two BNC type coax connectors
OUTPUT CONNECTOR
Four BNC type coax connectors
SURGE PROTECTION
Transorbs fitted as standard gas tubes optional for extra protection)
POWER
12V DC, 200 mW per channel supplied by the BH220 rack
OPERATING TEMP
-30ºC to +45ºC

Ordering Information:
For a quotation, further details or technical support and advice, contact us by phone on +44 (0)1483 480969, fax +44 (0)1483 797268 or email us, quoting part number BH192/3125.

Products available for use with BH192/3125:
BH220           19” Modular Rack (unpopulated), with in line power supply and extender card
BH193/3125   2 Channel, 1 in 5 out module with Video Distribution Amplifier (max 8 per rack)
BH231/3125   2 Channel, 1 in 4 out module with Video Distribution Amplifier (max 16 per rack)